Canon DC50, DC220 Temperature TOO, Disc Cannot Record, Check the Disc, Reached the Maximum, Scene

	Trouble?	103
Message	Explanation
• TEMPERATURE TOO	The camcorder has exceeded its operational temperature.	–
HIGH CANNOT RECORD	Disconnect the compact power adapter and remove the battery and
• TEMPERATURE TOO	let the camcorder cool down before resuming use.
HIGH CANNOT REMOVE
DISC
CANNOT RECORD	There is a problem with the disc. Replace the disc.	26
CHECK THE DISC
	This message can also appear if condensation has formed. Wait	110
	until the camcorder dries completely before resuming use.
	The disc’s recording surface may be dirty or scratched.	–
REACHED THE MAXIMUM	The maximum number of scenes has been reached. Delete some	26
NUMBER OF SCENES	recordings (DVD-RW in VR mode) to free some space or replace	69
	the disc.
CANNOT PLAY DISC	The disc is dirty or you attempted to play back a disc type not	–
	supported (not DVD-R/RW).
	This message can also appear if condensation has formed. Wait	110
	until the camcorder dries completely before resuming use.
CANNOT EDIT DISC	There are no scenes to edit or the recording is damaged.	–
	This message can also appear if condensation has formed. Wait	110
	until the camcorder dries completely before resuming use.
CANNOT DIVIDE THE	Photomovie scenes cannot be divided.	74
SCENE
	You may not be able to divide very short scenes.	–
	Scenes cannot be divided when the disc already contains 999	–
	scenes.
	You may not be able to further divide scenes shorter than 5	–
	seconds that were created by dividing a previous scene.
PLEASE USE ONLY THE	The dual-layered disc you inserted cannot be used with this	6
RECOMMENDED DISCS	camcorder.
DISC IS FINALIZED	You cannot record additional scenes on a finalized DVD-R/	–	Additional
CANNOT RECORD	DVD-R DL disc.
	You cannot record additional scenes or unfinalize a DVD-RW disc	–
	in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC	You cannot record additional scenes or convert still images to a	79
CHECK THE DISC	Photomovie scene on a finalized DVD-RW in VIDEO mode.		Information
	Unfinalize the disc first.
DISC IS PROTECTED	The disc is protected. Replace the disc or remove the disc	71
	protection.
CANNOT READ THE DISC	Disc could not be read. Try cleaning it or replace the disc.	108
	This message can also appear if the camcorder has exceeded its	–
	operational temperature. Turn off the camcorder and let it cool
	down before resuming use.
	This message can also appear if condensation has formed. Wait	110
	until the camcorder dries completely before resuming use.
	The disc may not be loaded correctly. Try removing the disc and	26
	reinserting it.