5.2 Advanced Installation
You can search other channels except DIGITURK channel.
Enter the PIN code using the NUMERIC buttons. The default PIN code is set to "0000".

1. Antenna Setting

You can set antenna and LNB information to search channels using Antenna Setting (MENU-Installation-Advanced
Installation-Antenna Setting).
**
•Antenna Alternative: Select antenna alternative which has different
combinations of settings for search. Antenna Alternative 16 is predefined
for SMATV.
•Satellite Name: Displays the satellite list in name order. If the desired
satellite name is not listed, then select "User Defined". You can enter the
Satellite Name using the keyboard displayed on the screen.
•LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB.
•22KHz Tone: When using the 22HKz tone switch, select "Enabled".
Otherwise, select "Disabled".
•DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment
Control) switch to connect multiple antennas or LNBs, select DiSEqC input
to connect to antenna or LNB.
•Motorised System: When using motorised system, select “Enabled”.
Otherwise, select “Disabled”. When Motorised System is set to “Enabled”
DiSEqC Input is disabled.
•LNB Voltage: You can select "Standard" voltage or "High" voltage.
•LNB Power: You can select "On" or "Off".
**
When you complete the settings, press the OK button to move to the Manual Search menu.
5. Installation
GB 24