Canon F80, F60 Improving copied images

5-2 Copying Chapter 5

Improving copied images

Setting color or black & white copying

Refer to Making copieson p. 5-1, and in step 4,set color or black & white copying as follows:

For color copying:Press [Color] to turn on its light.

For black & white copying:Press [B&W ] to turn on its light.

Adjusting the image quality (resolution)

Refer to Making copieson p. 5-1, and in step 4,adjust the image quality as follows:

1Press [Image Quality].

2Use [2] or [3] to select the image quality.

•In black & white mode,select:

–<B&W TEXT> for text-only documents.

–<B&W PHOTO> for photographs.

–<B&W DRAFT> for high-speed copying at a lower resolution.*

In color mode select:

–<COLOR NORMAL> for color text-only documents.

–<COLOR FINE> for color photographs.

–<COLOR FAST> for high-speed color copying at a lower resolution.*

3Press [Set].

NOTE

•When using <COLORFAST>,if the color output is different from that expected, select <COLOR

NORMAL> or <COLORFINE> and try copying again.

Adjusting the exposure (density)

Exposure (density) is the degree of difference between light and dark.A high contrast setting

will make blacks darker and whites brighter,whereas a low contrast setting will make the

differences between black and white less marked.

Refer to Making copieson p. 5-1, and in step 4,adjust the exposure as follows:

1Press [Exposure].

2Use [2] or [3] to select the exposure.

3Press [Set].

*This setting is only available when <PLAIN> is selected as the print media type (p.3-6).

Contents

Main II Preface III How to use the documentation provided Viewing documentation provided in the CD-ROM Software Guide 3 1 2 Type conventions Preface V Contents 1: Introduction 2: Document handling 3: Print media handling 4: Photo printing from a memory card VI 12:Troubleshooting 13:Machine settings Appendix:Specifications Index Safety information Location VIII Power Supply Preface IX Handling X Maintenance Legal limitation on usage of your product and the use of images Users in the U.S.A. Pre-installation requirements for Canon facsimile equipment A.Location B.Order information Connection of the equipment In case of equipment malfunction Rights of the telephone company FCC Notice Users in Canada Pre-installation requirements for Canon facsimile equipment A.Location B.Order information C.Power requirements NOTICE Introduction What your machine can do 1-2 Main components of the machine Operation panel of the machine 1-4 Document handling Documents requirements 2-2 Loading documents Using the platen glass 1 2 3 Using the ADF Print media handling Recommended print media and requirements Plain Paper Envelopes 3-2 Bubble Jet Paper LC-301 High Resolution Paper HR-101N Glossy Photo Paper GP-301/GP-301N Glossy Photo Cards FM-101 Photo Paper Pro PR-101 Photo Paper Pro PC-101S High Gloss Photo Film HG-201 Transparencies CF-102 3-4 General print media guidelines Setting the paper thickness lever 1 2 3 3-6 Setting the print media size and type 1 2 3 4 5 Loading print media Loading paper 1 2 3 Loading envelopes 4 5 Loading banner paper 1 2 3 4 Photo printing from a memory card Compatible memory cards Recommended print media 4-2 Inserting/removing a memory card Inserting a memory card 1 2 3 Step 1 Step 2 Printing an index Printing all frames Page Printing a single frame Page Printing a range of frames Page 15 16 17 18 DPOF (Digital Print Order Format) printing Page Setting vivid photo printing Setting date printing Copying Documents you can copy Making copies 5-2 Improving copied images Setting color or black & white copying Adjusting the image quality (resolution) 1 2 Adjusting the exposure (density) Reducing or enlarging a copy Using preset copy ratios 1 2 Using custom copy ratios 1 2 Advanced copy features Copying two pages on a single page Borderless copying 5-6 AB Repeating an image on a page 1 2 3 4 Page Creating a mirror image Shrinking an image to fit the page Registering information in your machine Methods of registering information Guidelines for entering numbers,letters, and symbols 1 2 Registering required sender information Entering the sender information 1 Page Speed dialing Speed dialing methods Registering one-touch speed dialing Page Registering coded speed dialing Page Registering group dialing 10 11 12 7-8 Using speed dialing 1 2 1 Printing speed dialing lists Sending faxes Documents you can fax Sending methods Memory sending 1 Manual sending Improving faxed images Setting color or black & white transmission Adjusting the image quality (fax resolution) 1 2 8-4 Dialing methods Redialing a busy number Manual redialing Automatic redialing Page Sending the same document to several recipients (sequential broadcasting) 1 2 3 4 5 Documents stored in memory Printing a list of documents in memory Printing or deleting a document in memory 9 10 Checking a documents details Special dialing Dialing through a switchboard Switching temporarily to tone dialing Receiving faxes Receiving methods Setting the receive mode 1 2 4 Receiving both faxes and voice calls automatically: FAX/TEL AUTO SW Customizing FAX/TEL AUTO SW 10 11 12 13 Receiving faxes automatically: FAX ONLY MODE 9-4 Receiving faxes manually: MANUAL MODE Receiving a fax manually 1 2 3 4 Receiving when an answering machine is connected: ANS.MACHINE MODE Adjusting the answering machine Receiving with a DRPD (Distinctive Ring Pattern Detection) service: DRPD Setting the ring pattern Receiving faxes to the MultiPASS Suite When your computer is off Canceling receiving Reports and lists Summary of reports and lists ACTIVITY REPORT Printing the ACTIVITY REPORT Adjusting the ACTIVITY REPORT setting Adjusting the TX REPORT setting Adjusting the RX REPORT setting Printing the USERS DATA LIST Maintenance Cleaning your machine Cleaning the exterior Cleaning the interior Cleaning the scanning area Page Page 11-4 Replacing ink tanks When to replace an ink tank 1 Guidelines Replacing an ink tank 2 3 4 5 6 Step 1 Step 2 Step 2 Step 3 Printing the nozzle check pattern Cleaning the printhead Aligning the printhead Page Troubleshooting Chapter 12 Troubleshooting 12-1 Problems installing and removing software See below if you were unable to install or remove the software. Cannot install the software. Problems printing from your computer Cannot print at all. Cannot print to a shared printer. Printing stops in the middle. 12-4 Paper does not feed properly. Paper curls. Meaningless characters and symbols are printing. White streaks appear on the printout. Problems using a memory card Memory card is not recognized. 12-6 ?is printed in the index. You have followed the procedures above and the memory card is still not recognized. Cannot write to the memory card (write protect error displayed in Windows). Removable disk does not appear in Windows Explorer. Copying problems Cannot make a copy (the document or paper will not feed into the machine). Paper comes out but there is nothing copied on it. Copy quality is poor. 12-8 Problems scanning to a computer See below if you have problems scanning a document to your computer from the machine. Cannot scan a document. Computer has hung up or frozen. Chapter 12 Troubleshooting 12-9 The image you have scanned looks dirty. White margins appear around the scanned image. White lines appear on the left side of the image. Cannot scan multiple photographs correctly. Scanned image is displayed at a large (small) size on the computer screen. Problems receiving faxes See below if you are having problems receiving faxes on the machine. Cannot receive a fax,cannot print a fax. Chapter 12 Troubleshooting 12-11 Cannot receive faxes automatically. Machine does not switch automatically between voice and fax reception. Quality of received fax is poor. Cannot receive a fax in ECM mode. Repeated errors occur when you receive a fax. Problems sending faxes Cannot send a fax. Fax sent is dirty. You cannot send a fax in ECM mode. Chapter 12 Troubleshooting 12-13 Telephone problems See below if you have problems using the telephone. Cannot dial. Telephone disconnects during a call. 12-14 If nothing displays in the LCD (if there is no power) If the power disconnects unexpectedly Removing jammed paper Removing jams in the paper output tray 1 2 Removing jams from the machines interior Removing jammed documents 1 2 3 4 5 6 If the nozzle check pattern does not print properly Interpreting the messages LCD messages 12-18 Chapter 12 Troubleshooting 12-19 12-20 Chapter 12 Troubleshooting 12-21 12-22 MultiPASS Status Monitor messages If you cannot solve the problem Machine settings Printing a list to check the current settings Accessing the machine settings 1 2 3 Settings Menu: SPECIAL COPY Menu: MAINTENANCE [Fax] Chapter 13 Machine settings 13-3 Menu: USER DAT A 13-4 Chapter 13 Machine settings 13-5 13-6 Menu:RECEIVE MODE Menu: MEMORY REFERENCE Menu:REPORTS/LISTS Menu: PHOTO PRINT MODE Chapter 13 Machine settings 13-7 13-8 Appendix Specifications General specifications A-2 Ink specifications Print specifications Photo print specifications A-4 Copy specifications Fax Model Fax specifications Telephone specifications Index Index I-1 I-2 Index I-3 I-4