9-6 Receiving faxes Chapter 9
Setting the ring pattern
Your telephone company will assign a distinctive ring pattern to each number when you
order the DRP service.Follow this procedure to set the fax ring pattern that matches the
pattern assigned by the telephone company:
1Make sure you have set <DRPD> (p.9-1).
2Press [Menu].
3Use [2] or [3] to select <USER DATA>.
4Press [Set].
5Use [2] or [3] to select <FAX SETTINGS>.
6Press [Set].
7Use [2] or [3] to select <RX SETTINGS>.
8Press [Set].
9Use [2] or [3] to select <DRPD:SELECT FAX>.
10 Press [Set].
11 Use [2] or [3] to select the ring pattern that your telephone company
assigned to your fax number.
•Select from the following:
–<DOUBLE RING>
–<SHORT-SHORT-LONG>
–<SHORT-LONG-SHORT>
–<OTHER RING TYPE>
–<NORMAL RING>
12 Press [Set].
13 Press [Stop/Reset].
DRPD:SELECT FAX
DOUBLE RING
RX SETTINGS
1.ECM RX
FAX SETTINGS
1.USER SETTINGS
USER DATA
1.TEL REGISTRATION