Canon MiniTT1 owner manual Specifications cont’d, FlexTT5, Hot-shoe made of glass reinforced resin

Specifications (cont’d)

	MiniTT1	FlexTT5
Camera/P1		Port 1/8” (3.5 mm) stereo miniphone for
		2-stage remote camera triggering.
		Port Voltage Handling: up to 50 Volts,
		100 milliamp continuous
		Tip = Trigger
		Ring = Pre-Trigger
		Sleeve = Ground
Flash/P2 Port		1/8” (3.5 mm) mono miniphone.
		Port Voltage Handling: up to 200 Volts,
		4 amps peak, 250 milliamp continuous,
		non-polarized
Voltage present	3.3 VDC (all pins) - safe for all Canon cameras	3.3 VDC (all pins) - safe for all Canon cameras
Hot Shoe voltage protection	Hot Shoe: up to 50V	Hot Shoe: up to 50V
USB	5VDC regulated, 100mA	5VDC regulated, 100mA
	Pin 1 Positive, Pin 4 Ground	Pin 1 Positive, Pin 4 Ground
Mounting	Hot-shoe	Hot-shoe, 1/4-20, lanyard, Velcro
Construction	High impact plastic, captive battery door.	High impact plastic, captive battery door.
	Hot-shoe made of glass reinforced resin.	Hot-shoe made of glass reinforced resin.
Dimensions	2.8” (7.1 cm) long x 1.9” (4.9 cm)	3.6” (9.2 cm) long x 2.9” (7.3 cm) wide x
	wide x 1.3” (3.3 cm) tall	1.4” (3.6 cm) tall, antenna lowered
Antenna	Internal	2.7” (6.9 cm) rubberized, 180 degree swing
Weight (with batteries)	2.3 oz (65 grams)	5.4 oz (153 grams)
	2.0 oz (57 grams) without battery	3.8 oz (108 grams) without batteries
Operating Temperature	Above -15 C (5 F) and below 50 C (120 F)	Above -15 C (5 F) and below 50 C (120 F)
Storage Temperature	Above -30 C (-22 F) and below 85 C (185 F)	Above -30 C (-22 F) and below 85 C (185 F)
	without batteries	without batteries

37