Batteries

CAUTION

Turn OFF your equipment (PocketWizard units, electronic flash units, cameras, etc.) before making connections or changing batteries.

FlexTT5:

Install 2 fresh AA (IEC:LR6) batteries into the FlexTT5 Transceiver. Make sure to note proper polarity. Alkaline batteries are recommended. Rechargeable or other chemistry batteries will also work, though life expectancy may vary.

Life expectancy = ~60 hours with alkaline batteries

MiniTT1:

Install a fresh CR2450 or CR2354 coin cell battery into the MiniTT1 Transmitter. Make sure to note proper polarity.

The CR2450 is recommended for longer battery life. The MiniTT1 saves batteries by automatically entering an extremely low power state when the camera enters sleep mode, or if not on a camera and TEST is not pressed for 10 seconds.

Life expectancy = 100’s of hours/thousands of triggers and varies based on usage profile

MiniTT1 and FlexTT5:

Look at the normal LED blink to determine battery level, or use the PocketWizard Utility.

LED Blink:

Green Good battery

Amber Warning – battery low

Red Very low battery – change immediately

FlexTT5 Battery Polarity

MiniTT1 Battery Polarity

CR2450 & CR2354 batteries

6

Page 6
Image 6
Canon FlexTT5, MiniTT1 owner manual Batteries, Life expectancy = ~60 hours with alkaline batteries