A
Yellow | To the |
Plug | Video In Jack |
Black | To the |
Plug | Audio In Jack |
1 | Turn the main dial to | and confirm |
that the TV is turned off. |
|
2Attach AV cable
3Plug the other ends of the AV cable to the video in and audio in jacks on the TV.
4Turnmode.on the TV and switch it to Video
5 | Turn the camera’s main dial to | or | . |
• The image will appear on the TV. Shoot or |
| ||
| replay images as usual. |
|
|
| • If the images are not appearing on the TV |
| |
| when shooting, press the | button. |
|
• No image will display in the LCD monitor when the camera is connected to a TV monitor.
•The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 119). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc
PAL: Europe, Asia (Excluding some areas), Oceania, etc
•You can plug the AV cable into either the left or right input jack on the TV. Please consult the TV’s manual for details.
• A TV monitor cannot be used in | mode. |
120Shooting / Replaying with a TV Monitor