Installing the Battery Pack

Install Battery Pack BP-511 (supplied) into the camera as follows. Use a household power source to power the camera for extended periods (p. 20).

1 Turn the main dial to .

2Slide the battery cover lock in the direction of the arrow and open the

battery cover.

3Insert the battery pack as shown.

4 Close the battery cover.

Terminals

Charge the battery pack before using it the first time (p. 16).

The flashing green indicator signals that the CF card is being written to, read, or erased, or that data is being sent to the computer. Never open the battery cover or remove the battery while it is flashing.

Remove the battery pack when the camera is not in use.

Battery Status Symbols

The following icons indicate the battery status. These icons will not appear while the camera is plugged into a household power source.

(Steady): Sufficient battery charge (Flashing): Low battery

(Flashing): Replace or recharge battery

18Preparing the Camera