• You can change the following settings.

- Resolution:

L (Large)* / M1 (Medium 1) / M2 (Medium 2) / S (Small)

- Compression:

(Superfine) / (Fine)* / (Normal)

- Flash:

(Red-Eye Reduction Auto)* / (Auto) / (Off)

- Drive Method:

Single* / Self-Timer

- Macro:

Off* / On

- Digital Zoom:

Off* / On

- AF Mode:

Continuous* / Single

- Review:

Off / 2 sec* / 10 sec.

-File No. Reset: Off* / On * Default settings

•With the Review function, you can change the length of time images show in the LCD monitor after shooting, or set it so they do not show at all (p. 39).

Checking an Image Right after Shooting

Checking the Image

The following explains ways to view the photographed image in addition to viewing it for 2 seconds in the LCD monitor when it has been opened.

Keeping the Shutter Button Pressed

The image will continue to display in the LCD monitor as long as you keep the shutter button fully depressed.

Pressing the Button

If you press the button while the image is displayed in the LCD monitor, it will continue to display even after the shutter button is released. Press the shutter button halfway again to stop displaying it.

• You can perform the following while images are displayed.

-Erasing Images (p. 9)

-Displaying Images in the Detailed Display Mode (p. 33)

-Magnifying Images (p. 87)

42Shooting - Letting the Camera Select Settings