The camera features a power save function that turns the camera off under the following conditions when it is set to on.
Shooting Mode: | powers down approximately 3 minutes after a control is last |
| accessed. The LCD monitor will shut off approximately 3 |
| minutes after a control is last accessed even if the power |
| save function is turned off. |
Replaying Mode: | powers down approximately 5 minutes after a control is last |
| accessed. |
Card Photo Printer | |
| powers down approximately 5 minutes after a control is last |
| accessed on the camera or something is printed on the printer. |
PC Connection: | displays a warning message on the computer screen |
| approximately 5 minutes after a control is last accessed. |
| The camera will power down if no controls are used after |
1 additional minute.
It will not activate when the camera is powered from a household power source.
•Pressing the shutter button halfway will restore power when the camera shuts down with the power save function.
•Please note that the camera continues to consume a minimal amount of power even when the power save function shuts it down.
•The power save function is disabled while a slide show plays on the camera (p. 86).
•You can turn off the power save function in the Set up menu (p. 104).
Switching between Shooting and Replaying
Shooting
• Turn the main dial to .
Replaying
• Open the LCD monitor and turn the main dial
to 
. If you switch rapidly to replay mode directly from shooting mode, the lens may not retract. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot.
•Be careful not to touch the lens while in replay mode.
30Basic Functions