The following messages may appear when the camera is connected to the Direct Print compatible Bubble Jet Printer.
Check the error number displayed on the control panel of Bubble Jet Printer and refer to the Bubble Jet Printer Quick Start Guide.
Printer in use: | The printer is printing the data from the memory card |
| inserted in the computer or printer. The printer |
| automatically starts printing the images from the |
| camera after completing the current printing. |
|
|
Printer warming up: | Printer is warming up. When it is ready, the printer |
| starts printing automatically. |
|
|
No printhead: | No print head is installed in the printer. |
|
|
Printer cover open: | Close the printer cover securely. |
|
|
Media type error: | A paper incompatible with the Print Style has been |
| selected. Set a paper compatible with the Print Style |
| you chose. |
|
|
Paper level error: | Adjust the paper selection lever to the proper position. |
|
|
Low ink level: | The ink tank needs to be replaced soon. Prepare a |
| new ink tank. If you select [Continue] in the error |
| screen, you can restart printing. |
|
|
Waste tank full: | You can restart printing by pressing the RESUME/ |
| CANCEL button on Bubble Jet Printer. Please request |
| replacement of the waste tank to the shop where you |
| purchased the printer or your nearest Canon customer |
| support center listed in the Bubble Jet Quick Start |
| Guide. |
|
|
Printer error: | Turn off the printer, then turn it on again. If the error |
| persists, please consult your nearest Canon customer |
| support center listed in the Bubble Jet Quick Start |
| Guide. |
|
|
12Printing with the Direct Print Compatible Bubble Jet Printer (Optional)