To a Car’s Cigarette Lighter Socket
1Attach the car battery cable to the charge adapter.
2With the engine running, plug the car battery cable into the cigarette lighter socket.
3Attach the battery pack.
•Align the battery pack with the ▲ mark on the charge adapter and slide it in the direction of the arrow.
•Up to two Battery Pack
•Either slot, A or B, can be used to charge a single battery pack. When two are placed in the charge adapter, the first one to be installed will start charging. The second battery pack will start charging after the first has been fully charged.
•If two battery packs have been placed in the charge adapter before it is plugged into the cigarette lighter socket, the one placed in the A side will charge first. (B side will start after A side is fully charged.)
•The red light will flash while a battery pack is charging and shine steady when it is charged.
•It takes approximately 80 minutes to charge a single battery pack.
4After charging, remove the battery pack.
•Remove the battery pack by sliding it in the opposite direction from which it was installed.
22Preparing the Camera