• If the shutter speed is flashing in the display panel or shown in red in the LCD monitor, the image is under- or overexposed
(insufficient light). Adjust the aperture value using the or arrow on the omni selector until the flashing stops or the shutter speed display turnes to white.
•F2.0 and F2.2 cannot be selected when the focal length has been set to the maximum telephoto setting with the zoom lever.
•Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears in the center of the LCD monitor, secure the camera to a tripod to shoot.
•The following chart shows the relationship between the aperture value and maximum shutter speed.
Aperture Value | Maximun Shutter Speed |
F2.0 - 3.21/500
F3.5 - 4.51/640
F5.0 - 7.11/800
F8.01/1000
* When using a flash in this mode, the slowest shutter speed is 1/ 60 second.
Aperture Setting DisplayThe larger the aperture value, the smaller the lens aperture.
F2.0 F2.2 F2.5 F2.8 F3.2 F3.5 F4.0 F4.5 F5.0 F5.6
F6.3 F7.1 F8.0
The display of aperture settings differs between the display panel and LCD monitor.
Aperture Value | F2.0 | . . . | F8.0 |
| |||
Display Panel |
| . . . |
|
|
|
|
|
LCD Monitor | F2.0 | . . . | F8.0 |
|
Shooting - Selecting Particular Effects 65