3Touch on the individual photos you want to copy.

•A checkmark O will appear on photos selected. Touch a selected photo again to remove the checkmark.

•To select all the photos at once: Touch [Select All] instead of touching individual photos. (Remove in advance any checkmarks from photos you may have selected individually.)

4 Copy the photos.

[Edit] 8[Copy (f97)] (conly) or [Copy (497)] 8[Yes]* 8[OK]

* Touch [Stop] to interrupt the operation while it is in progress.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the double memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camcorder’s operating mode.

•When copying photos onto an Eye-Fi card in memory card slot Y, pho- tos will be uploaded automatically if you are within the range of a config- ured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0150).

NOTES

•In the following cases, you will not be able to copy recordings to the memory card:

-If the double memory card slot is open.

-If the LOCK switch on memory card Yis set to prevent writing.

-If there is no memory card in memory card slot Y.

•Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the camcorder cannot be copied to the memory card.

•If there is not enough space on memory card Y, as many photos as possible will be copied before stopping the operation.

132 Š External Connections