Disc access failure. Check the disc.
-There was an error when reading the disc or attempting to write onto it.
-This message can appear also if condensation has formed (0199). Wait until the DVD burner dries completely before resuming use.
-The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it after cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a different disc.
Error reading the data
- Check that the USB cable was not accidentally disconnected.
No disc
-Insert a disc into the DVD Burner.
-This message can appear also if condensation has formed (0199). Wait until the DVD burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
Operation canceled
-The USB cable was disconnected and the operation was canceled. Check the USB connection.
-The scenes selected to be written on the disc include scenes recorded in MXP mode. Add to the playlist in advance only those scenes recorded in other recording modes and create the disc from the [Playlist] index screen.
Unable to recover data
-Could not recover a corrupted file. Save your recordings (0133) and initialize the memory using the [Complete Initialization] option (040).
Direct Print Related Messages
Data transfer error
-Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable.
-You attempted to print from a memory card that contains a large number of photos. Reduce the number of photos.
File error
-You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer.
Additional Information 191