To use this function change the camcorder's mode from 5to y
-You pressed a button that cannot be used in 
mode. Set the mode switch to yto set the camcorder to flexible recording mode.
Too many photos. Disconnect the USB cable.
-Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000 photos (Macintosh computers).
-If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while.
Total play time is too long
- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min- utes. Reduce the number of scenes in the playlist.
Unable to recognize the data
-You transferred data to the camcorder recorded in a different television system (PAL or SECAM). Play back the recordings with the device originally used to record them.
Unable to recover data
-Could not recover a corrupted file. Save your recordings (0133) and initialize the memory using the [Complete Initialization] option (040).
Messages Related to the Optional DW100 DVD Burner
If an error message appears while the camcorder is connected to the optional
Cannot read the disc. Check the disc.
-During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted. Replace with a brand new disc.
-During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD Burner.
Close the memory card slot cover
-The memory card slot cover is open. Close the cover after correctly inserting the memory card (037).
Connect the compact power adapter
-The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
190 Additional Information