Hardware error
-Cancel printing. Turn off the printer and turn it back on.
-Check the printer status.
-Ink tank errors have occurred. Replace the ink tank.
Ink absorber full
-Touch [Continue] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber.
Ink error
-The ink level cannot be detected correctly or the ink cartridge is out of ink. Replace the ink cartridge.
Low ink level
- The ink cartridge needs to be replaced soon. Touch [Continue] to restart printing.
No ink
- The ink cartridge is not inserted or is out of ink. Replace the ink cartridge.
No paper
- Paper is not correctly inserted or there is no paper.
Paper error
-There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong.
-If the paper output tray is closed, open it to print.
Paper jam
-The paper jammed during printing. Touch [Stop] to cancel printing. After removing the paper, set some paper again and retry printing.
Paper lever error
- Paper lever error occurred. Adjust the paper selection lever to the proper position.
Print head not installed
- No print head is installed in the printer or the print head is defective.
Printer cover open
- Close the printer cover securely.
Printer error
-A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's green power lamp and orange error lamp flash alternately.)
-Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and contact the appropriate customer support center or service center.
Printer in use
- The printer is in use. Check the printer status.
192 Additional Information