The computer does not recognize the camcorder even though the camcorder is connected correctly.

-88[USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or to [Connect and Set].

-Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection.

-Connect the camcorder to a different USB port on the computer.

-The camcorder will not be correctly recognized if you connected the USB cable to the com- puter while the camcorder was deleting all the photos. Disconnect the USB cable and restore the connection once the operation is completed.

The printer is not working even though the camcorder and printer are connected correctly.

-88[USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or to [Connect and Set].

-Disconnect the USB cable and turn off the printer. After a short while turn it on again and restore the connection.

-Cannot connect to a PictBridge-compatible printer if the memory contains 2,500 photos or more.

After connecting the camcorder to a printer, the message [Busy] continues to appear on the screen

- Disconnect the USB cable and restore the connection after a short while.

Photos are not correctly printed

- You may not be able to print correctly, using a ictBridge-compatible printer, photos whose file names have been changed or that were recorded, created, edited or changed using another device.

Cannot save photos on my computer

-When the memory contains too many photos (Windows – 2,500 photos or more, Macintosh – 1,000 photos or more), you may not be able to transfer photos to a computer. Try using a card reader to transfer the photos on the memory card. conly: To transfer the photos in the built-in memory, copy them to the memory card in advance (0130).

The camcorder does not recognize the DW-100 DVD Burner even though it is connected correctly.

-88[USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] or to [Connect and Set].

182 Š Additional Information