Check the memory card

- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.

- A memory card error occurred. The camcorder cannot record or display the image. Try removing and reinserting the memory card, or use a different memory card.

-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (036).

-If after the message disappears, 4/ 7appears in red, perform the following: Turn off the camcorder and remove and reinsert the memory card. If 4/ 7turns back to green you can resume recording/playback. If the problem persists, save your recordings (0133) and ini- tialize the memory card (040).

Could not add the scene(s) to the playlist

-One or more scenes could not be added to the playlist. The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in MXP or FXP mode, the maximum num- ber of scenes in the playlist may be less than 999. Delete some scenes from the playlist (099).

Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Cannot write data with this connection. To write data to the camcorder, connect the compact power adapter then reconnect the camcorder and computer.

-The camcorder cannot be operated while it is not being powered by the compact power adapter and is connected to a computer with the supplied USB cable. In addition, scenes can- not be written back and music files cannot be transferred to the camcorder. To avoid corrupt- ing the data in the camcorder's memory, use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

-To be able to write back scenes and to transfer music files to the camcorder, use the com- puter's Safely Remove Hardware function to end the connection, disconnect the USB cable, power the camcorder using the compact power adapter and only then connect it to the com- puter again.

Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Connect the compact power adapter

-When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

-To be able to write back scenes and to transfer music files to the camcorder, power the cam- corder using the compact power adapter and only then connect it to the computer using the supplied USB cable.

186 Š Additional Information