Error writing on the memory card. Data may be recovered if the memory card has not been removed. Attempt recovering the data?
- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try to recover the recordings. If you removed the memory card and used it with another device after this happened, we recommend you select [No].
File name error
- The folder and file numbers have reached their maximum value. Set 88[Photo Num- bering] to [Reset] and delete all the photos on the memory card (0106) or initialize it (040).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (040).
LCD Screen has been dimmed
- Hold hpressed for 2 seconds to restore the LCD screen to its previous brightness set- ting.
May not be possible to record movies on this memory card
-You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (057) to free some space.
Mem. Card Unable to recognize the data
-The memory card contains scenes recorded in a different television system (PAL or SECAM). Play back the recordings in the memory card with the device originally used to record them.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover (037).
Memory card is full
-The memory card is full. Delete some recordings (057, 106) to free some space or replace the memory card.
Memory card is
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.
Additional Information 187