Page 4 - INDeX Setup Installation Procedure
Installation Procedure Prior to installation of the INDeX 4602 IP Telephone on a user's networked PC,
ensure that both the INDeX and IPNC have been configured as follows:
INDeX Setup
Log on to the INDeX and open the Administration menu and perform the
following:
1. Open Directory | General Setup | Assign VoIP Users and enter the IPNC
group then the required user number.
2. Open Directory | General Setup | Reserved numbers and set the
Remote Login Number to an unused directory number or leave as the
default of 18. Record this number as it will be used latter on in the
installation process.
3. Open Linecard Information | Setup and ensure that the IPNC is set to an
ISDN T type interface.
Refer to the INDeX Programming Manual for details.
IPNC Setup
Log on to the IPNC's Manager and perform the following:
1. Open System and record the IPNC's IP address.
Consult with the Network Administrator and ensure that the IP addresses of
all the PCs (that are to have 4602 IP Telephones installed) are compatible
with that of the INPC, e.g. on the same subnet, etc.
2. Open User and create a VoIP user for every 4602 IP Telephones that is to
be installed. Ensure that the Compression mode is set to automatic.
Refer to the IPNC Administration Manual for details.
Page 4 - INDeX Setup INDeX 4602 IP Telephone Installation Manual
Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)