Printing procedure
Basic Printing W orkow

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a dif ferent type or width before printing.
Note
•If you are not using the Media T ake-up Unit , spread a clean cloth or paper on the oor before printing
long documents such as banners. Otherwise, use the optional Output Stacker . ( → P .220)
The printing may become dirty by touching the oor , when the long sheet is printed.
•If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually . ( → P .191)
1. T urn the printer on. (→P .18)
2. Select a roll as the paper source. (→P .176)
140 Basic Printing W orkow