Cannot print over a network
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually .
1. Press the Menu button to display MAIN MENU .
2. Press or to select Interface Setup , and then press .
3. Press or to select Ethernet Driver , and then press .
4. Press or to select Auto Detect , and then press .
5. Press or to select Off , and then press OK .
Return to the Ethernet Driver menu.
6. Press or to select Comm.Mode , and then press .
7. Press or to select the communication mode, and then press the OK button.
Return to the Ethernet Driver menu.
8. Press or to select Ethernet T ype , and then press .
9. Press or to select the Ethernet type, and then press OK .
Return to the Ethernet Driver menu.
10. Press or to select Spanning T ree , and then press .
1 1. Press or to enable or disable spanning tree support, and then press OK .
Return to the Ethernet Driver menu.
12. Press the Online button.
After the conrmation message is displayed, press OK .
The printer will now restart.
734 T roubleshooting