Cutter Unit
Cutter Unit

Cutter Unit

A reaplacement Cutter Unit .
•Cutter Unit CT -06
Note
•For instructions on replacing the Cutter Unit , see “Replacing the Cutter Unit”. (→P .703)

Replacing the Cutter Unit

Note
•For information on compatible Cutter Unit , see “Cutter Unit”. (→P .703)
1. T urn the printer on. ( → P .18)
2. Press the Menu button to display MAIN MENU .
3. Press ▲or ▼to select Maintenance , and then press the ►button.
4. Press ▲or ▼to select Change Cutter , and then press the ►button.
5. Press ▲or ▼to select Y es , and then press the OK button.
After the Carriage is centered, a message is shown on the Display Screen instructing you to
open the T op Cover .
Note
•If you do not respond within two minutes, cutter replacement is canceled and the printer goes online
automatically . In this case, repeat this procedure.
6. Open the T op Cover .
Maintenance 703