Network Setting
Item Details
Default Setting
RA W Printing Activate this setting to use Raw
Printing.
On
SMTP Server Address Specify the SMTP server ’ s IP
address.
0.0.0.0
Primary DNS Server Address Specify the IP address of the
primary DNS server .
0.0.0.0
Secondary DNS Server Address Specify the IP address of the
secondary DNS server .
0.0.0.0
DNS Host Name Specify the printer host name,
up to 63 characters (1-63
characters). Use single-byte
letters, numbers, and “-”
(hyphens). Do not use numbers
or “-” for the rst character or “-”
for the last character .
NB-17FBxxxxxxxxxxxx
DNS Domain Name Specify the printer domain
name, up to 63 characters. Use
single-byte letters, numbers, “-”
(hyphens), and “.” (periods). Do
not use numbers, “-” , or “.” for the
rst character , or “-” or “.” for the
last character .
(Blank)
Multicast DNS Service Name Specify the printer ’ s Multicast
DNS service name, up to 63
characters. (1-63 characters)
This name will be displayed when
Bonjour functions are used.
Canon iPFxxxx (xxxxxx)
7. Click OK to display the Network page.
Note
•If you specify to congure the IP address using DHCP , BOOTP , or RARP , there must be a server that
supports such protocol running in the network.
•If you specify to congure the IP address using DHCP , BOOTP , or RARP , the IP address obtained by this
method is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.
•It takes a minute or two to determine whether DHCP , BOOTP , or RARP are available. W e recommend
clearing check boxes of options you will not use.
•If you are using a DNS server , select Enable DNS Dynamic Update and enter the IP Address for DNS
servers, DNS host name, and DNS domain name in Primary DNS Server Address ,Secondary DNS
Server Address ,DNS Host Name , and DNS Domain Name , respectively .
Network Setting 617