Canon JX510P - page 40

38 Receiving Faxes
ENGLISH
Polling to Receive Documents
The polling feature allows you to request a document to be faxed to you from another fax
machine. The sending party only needs to make sure the document is on a fax machine and
ready to be sent. Thus, when your fax polls the other fax machine, the document is sent
automatically. The fax can poll any fax machine that supports polling.
1Press [Menu].
2Use [{] or [}] to select <FAX OPTIONS>, then press [Start/Copy].
3Use [{] or [}] to select <POLLING RX>, then press [Start/Copy].
4Dial the fax number of the fax machine you wish to poll.
Use one of the dialing methods described.
5Press [Start/Copy].
Your fax begins receiving the document.
Setting Caller ID
If the <CALLER ID> setting is set to <ON>, the caller’s name and phone/fax number appear on the
LCD when you receive a call. You can also set the fax to reject unwanted calls (JX510P only).
1Press [Menu].
2Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy].
3Use [{] or [}] to select <CALLER ID>, then press [Start/Copy]. The LCD displays
<OFF>.
4Use [{] or [}] to select <ON> to enable the <CALLER ID> feature, then press
[Start/Copy].
To disable the <CALLER ID> feature, use [{] or [}] to select <OFF>, then press
[Start/Copy]. Press [Stop/Reset] to return to standby mode.
5Press [Start/Copy].
Note
zBefore attempting to poll a fax machine, make sure that the other fax machine supports polling.
zYour fax cannot do polling transmissions.
Note
z<CALLER ID> is only available in some countries.
zTo use this feature, you will need to subscribe for a caller ID service (only available in some countries).
The <CALLER ID> feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local
telephone company for detailed information on this service.
zIf the <CALLER ID> setting is set to <ON>, the machine will not enter the power saver mode (see
page 12).
TEL= 3456xxxx