46 Using TAM Mode (JX510P only)
ENGLISH
7Hang up the Handset and press [Stop/Reset].
The fax returns to standby mode.
* The recording time for a voice memo can be set to the same settings as the recording time
for a telephone message. However, if you set 0 as the recording time for each telephone
message, voice memo recording time will be set to 60.
Deleting Messages
1Press [Menu].
2Use [{] or [}] to select <MSG REGISTRATION>, then press [Start/Copy].
3Use [{] or [}] to select the type of message you want to delete, then press [Start/
Copy]. The LCD displays <PLAY>.
4Use [{] or [}] to select <DELETE>, then press [Start/Copy].
5Press [Stop/Reset].
The fax returns to standby mode.
Playing Telephone Messages
Telephone messages will be played back in order from the oldest message recorded. If a voice
memo has been recorded, it will be played back first.
1Press [Play].
The day and time when the telephone message was recorded, the number of telephone
messages and the number of the message being played (ICM No.) are displayed whenever a
message is played.
Note
To play a voice memo, carry out step 1 to 3, select <PLAY> and then press [Start/Copy].
Note
You cannot delete <OUTGOING MESSAGE> or <ALT OUTGOING MSG>. An old outgoing
message or alternative outgoing message will be deleted automatically when you record a new
message.
Note
zPress [ ] to listen to the message again. (Repeat)
zPress [ ] to play the next message. (Skip)
zPress [ ] twice to play the previous message.
zPress [Stop/Reset] to stop playback.
zPress [Delete] during playback to delete a message.
zUse [{] or [}] to change the volume.
SUN 17:15 02/05