32 Receiving Faxes

ENGLISH
Receiving Faxes

Different ways to receive a document

Your fax provides you with several modes for receiving documents. To determine which mode best
suits your requirements, see the table below.
* This setting is only available for some countries.
<Fax/Tel Mode>/<NET SWITCH>*
Automatically switches between fax
and voice calls. Receives documents
automatically and rings for voice calls
(see page33).
<NET SWITCH>:
If your telephone service allows you to
have one telephone line with two
numbers: one for fax and one for
telephone, use this mode. Subscribe to
the Telstra FaxStream Duet service
(Australia) or the Telecom FaxAbility
service (New Zealand) (see page35).
<MANUAL MODE>
Rings for every call, regardless of
whether the call is a fax call or a voice
call. For a fax call, you have to
manually activate reception of the fax
(see page34).
<ANS.MACHINE MODE>
Receives documents automatically
and routes voice calls to the answering
machine. Connect an answering
machine to your fax (see page34).
For the JX510P model, cancel TAM
mode.
<FAX ONLY MODE>
Answers all calls as fax calls. Receives
documents automatically and
disconnects voice calls. Separate
telephone line for fax use only. If you
want to be alerted when a fax call is
received, enable the <INCOMING
RING> setting (see page57).
FAX
INCOMING CALL ...
RECEIVE
INCOMING CALL ...
Ring
Ring
Ring
Ring
INCOMING CALL ...
FAX
FAX
RECEIVE
Ring
Ring
LINE
INCOMING CALL... IN USE
FAX
RECEIVE
INCOMINGCALL ...
Pick up the Handset to answer
the call. You can not answer
with your external device.