45Using TAM Mode (JX510P only)
ENGLISH
Setting <TOLL SAVER>
Setting <TOLL SAVER> allows you to check whether you have any new messages when you
call from a remote location. When <TOLL SAVER> is set to <ON> and there are new messages,
the fax will answer after the second ring. If there are no new messages the fax will ring five times
before answering.
1Press [Menu].
2Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3Use [{] or [}] to select <TAM SETTINGS>, then press [Start/Copy]. The LCD
displays <MESSAGE LENGTH>.
4Use [{] or [}] to select <TOLL SAVER>, then press [Start/Copy]. The LCD
displays <ON>.
5Use [{] or [}] to select <ON>, then press [Start/Copy].
6Press [Stop/Reset].
Setting ends and the fax returns to standby mode.
Recording Voice Memos
Use this feature when you are going out and want to leave a message for another member of the
family. Use the Handset on the fax to record your voice memo.
Only one voice memo, 60, 120, or 240 seconds*, can be recorded. If you record a new voice memo
when there is already a voice memo recorded, the old voice memo will be deleted.
1Press [Menu].
2Use [{] or [}] to select <MSG REGISTRATION>, then press [Start/Copy].
3Use [{] or [}] to select <VOICE MEMO>, then press [Start/Copy].
4Use [{] or [}] to select <RECORD>, then press [Start/Copy]. The LCD displays
<LIFT HANDSET>.
5Pick up the Handset. Press [Start/Copy] and speak into the Handset to record your
voice memo.
The remaining recording seconds is displayed on the LCD.
6Press [Stop/Reset] when recording is finished. The LCD displays <REPLACE
HANDSET>.