Onkyo PR-SC886 Using Macros, Making Macros, Running Macros, Deleting Macros, Example

Controlling Other Components—Continued

Using Macros

You can program the remote controller’s MACRO but- tons to perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the follow- ing actions:

1.Press the [RECEIVER] REMOTE MODE button to select the Receiver remote controller mode.

2.Press the [ON] button to turn on the AV controller.

3.Press the [CD] INPUT SELECTOR button to select the CD input source.

4.Press the [CD] REMOTE MODE button to select the CD remote controller mode.

5.Press the Play [1] button to start playback on the CD player.

You can program a MACRO button so that all five actions are performed with just one button press.

Making Macros

Each MACRO button can store one macro, and each macro can contain up to eight commands.

	Remote
	indicator
MACRO
1, 2, 3
REMOTE	RECEIVER
MODE

1	While holding down the REMOTE
	MODE button of the remote con-
	troller mode you want to use at
	the start of the macro, press
	MACRO button [1], [2], or [3].
	The Remote indicator lights up.
	For the CD example in the left column,
	you’d press and hold the [RECEIVER]
	REMOTE MODE button, and then
	press MACRO button [1], [2], or [3].

2	Press the buttons whose actions
	you want to program into the
	macro in the order you want them
	performed.
	For the CD example in the left column,
	you’d press the following buttons:
	[ON], [CD] INPUT SELECTOR, [CD]
	REMOTE MODE, Play [1].
3	When you’ve finished, press the
	MACRO button again.
	The Remote indicator flashes twice.
	If you enter eight commands, the pro-
	cess will finish automatically.

Note:

If any of the buttons you used to make a macro are taught new commands, the macro will no longer work properly and will have to be made again.

Running Macros

Press the MACRO [1], [2], or [3] button.

The commands in the macro are trans- mitted in the order in which they were programmed. Keep the remote control- ler pointed at the AV controller until all of the commands have been transmit- ted.

Macros can be run at any time, regard- less of the current remote controller mode.

Deleting Macros

1	While holding down the
	[RECEIVER] REMOTE MODE but-
	ton, press the MACRO button
	whose macro you want to delete.

2 Press the MACRO button again.

126