Onkyo PR-SC886 instruction manual 116, Zone 2 and Zone, Connecting Your Zone 3 Speakers

Zone 2 and Zone 3—Continued

Connecting Zone 3

Zone 3 speakers must be connected to an amp in Zone 3.

Connecting Your Zone 3 Speakers

You can enjoy 2-channel stereo playback in Zone 3 and a different source to those selected for your main room and Zone 2.

Hookup

•Use an RCA audio cable to connect the AV control- ler’s ZONE 3 PRE OUT L/R jacks to an analog audio input on your Zone 3 amp.

•Use an RCA audio cable to connect the AV control- ler’s ZONE 3 PRE OUT SW jack to the line input on a powered subwoofer in Zone 3.

•Connect your Zone 3 speakers to the speaker termi- nals on your Zone 3 amp.

Main room

Multichannel power amp

AV controller

Zone 3

Powered

subwoofer

Receiver/

integrated amp

Note:

With the default settings, the Zone 3 volume must be set on the Zone 3 amp. If your Zone 3 amp has no volume control, set the “Zone3 Out” setting to “Variable” so that you can set the Zone 3 volume on the AV controller (see page 117).

116