Onkyo PR-SC886 instruction manual Connecting Both Audio & Video, Which Connections Should I Use?

Connecting the AV Controller—Continued

Connecting Both Audio & Video

By connecting both the audio and video outputs of your DVD player and other AV components to the AV controller, you can switch the audio and video signals simultaneously simply by changing the input source on the AV controller.

: Signal Flow

Video

Audio

DVD player, etc.

Video

Audio

TV, projector,

etc.

Power amplifier and speakers

(see page 26 for hookup details)

Which Connections Should I Use?

The AV controller supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide.

For video components, you must make an audio connection and a video connection.

Video Connection Formats

Video equipment can be connected to the AV controller by using any one of the following video connection formats: composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.

The AV controller can upconvert and downconvert between video formats, depending on the “Monitor Out” setting, which generally determines whether video signals are upconverted for the component video output or the HDMI out- puts.

For optimal video performance, THX recommends that video signals pass through the system without upconver- sion (e.g., component video input through to component video output). It’s also recommended that you set the “Immediate Display” preference to “Off” (see page 109), the “Picture Adjust” setting to the default (see

page 104), and the “Resolution” setting to “Through” (see page 49).

■“Monitor Out” Setting Set to “HDMI Main” or “HDMI Sub”

With the “Monitor Out” setting set to “HDMI Main” or “HDMI Sub” (see page 46), video input signals flow through the AV controller as shown, with composite video, S-Video, and component video sources all being upcon- verted for the respective HDMI output. Use the “HDMI Main” or “HDMI Sub” setting if you connect the AV controller’s HDMI OUT MAIN or HDMI OUT SUB, respectively, to your TV.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

Video Signal Flow Chart

DVD player, etc.

Composite S-Video Component HDMI

IN

AV controller

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

29