Onkyo PR-SC886 3 4 5 6, Analog Audio Input Setup, First Time Setup—Continued, Stereo, Mono, Notes

First Time Setup—Continued

Analog Audio Input Setup

	1
2, 3	2–6
1, 7

If you connect a component to the AV controller’s analog multichannel input, you must assign that input to an input selector. For example, if you connect your DVD player to the MULTI CH input, you must assign it to the DVD input selector.

If you connect a component to the AV controller’s bal- anced input, you must assign that input to an input selector. For example, if you connect your CD player to the BALANCED input, you must assign it to the CD input selector.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.

3

4

5

6

Use the Up and Down [q]/[w] but- tons to select “5. Analog Audio Input”, and then press [ENTER].

The “Analog Audio Input” menu appears.

1–5.	Analog Audio Input
Multich	DVD
Balance

Balance Input

VALUE RETURN RETURN SETUP EXIT

Use the Left and Right [e]/[r] buttons to select an input selec- tor.

You can assign the multichannel input to the following input selectors: “DVD”, “VCR/DVR”, “CBL/SAT”, “GAME/TV”, “AUX1”, “AUX2”, “TAPE”, “CD”, or “PHONO”.

Use the Up and Down [q]/[w] but- tons to select “Balance”, and use the Left and Right [e]/[r] but- tons to select an input selector:

You can assign the balanced input to the following input selectors: DVD, “DVD”, “VCR/DVR”, “CBL/SAT”, “GAME/TV”, “AUX1”, “AUX2”, “TAPE”, “CD”, or “PHONO”.

Use the Up and Down [q]/[w] but- tons to select “Balance Input”, and use the Left and Right [e]/[r] buttons to select:

Stereo:

Select if the source is stereo and you’ve connected it to the BAL- ANCED L and R INPUT XLR jacks.

Mono:

Select if the source is mono and you’ve connected it to the BAL- ANCED L INPUT XLR jack.

2

54

Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1.Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

7	Press the [SETUP] button.
	Setup closes.

Notes:

•To listen to the component connected to the multi- channel input, press the [AUDIO SEL] button repeat- edly to select Multich (see page 114).

•This procedure can also be performed on the AV con- troller by using its [SETUP] button, arrow buttons, and [ENTER] button.