Onkyo PR-SC886 instruction manual Audio Adjust

Advanced Setup—Continued

7	Use the Up and Down [q]/[w] but-
	tons to select “Loudness Plus”,
	and use the Left and Right
	[e]/[r] buttons to select:
	Off: Select this to turn off Loud-
	ness Plus.
	On: Select this to turn on Loud-
	ness Plus (default).
	When “Loudness Plus” is set to “Off”,
	the “Preserve THX settings” selection
	will appear under “Loudness Plus”
	(Step 8).
8	Use the Up and Down [q]/[w] but-
	tons to select “Preserve THX set-

tings”, and use the Left and Right [e]/[r] buttons to select:

Yes: When Yes is selected, Audyssey Dynamic EQ™ / Audyssey Dynamic Volume ™ will not be active.

No: When No is selected, Audyssey Dynamic EQ / Audyssey Dynamic Volume will be active in THX listen- ing mode depending on the setting.

	Note:
	This setting is only available if “Loud-
	ness Plus” is set to “Off” (step 7).
9	Press the [SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV control- ler by using its [SETUP] button, arrow buttons, and [ENTER] button.

THX Loudness Plus

THX Loudness Plus is a new volume control tech- nology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers. With THX Loud- ness Plus, home theater audiences can now experi- ence the rich details in a surround mix at any volume level. A consequence of turning the volume below Reference Level is that certain sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels and frequency response. This enables users to experience the true impact of soundtracks regardless of the volume setting. THX Loudness Plus is auto- matically applied when listening in any THX listen- ing mode. The new THX Cinema, THX Music, and THX Games modes are tailored to apply the proper THX Loudness Plus settings for each type of con- tent.

Audio Adjust

Here you can set listening mode-related settings and functions.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “3. Audio Adjust”, and then press [ENTER].

The “Audio Adjust” menu appears.

3.Audio Adjust

1.Tone Control

2.DSD

3.Multiplex/Mono

4.PLIIx/Neo:6

	5.	Dolby EX
	6.	Theater-Dimensional
	7.	LFE Level
		MOVE	ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-

tons to select an item, and then press [ENTER].

The function menu you selected appears.

4 Use the Up and Down [q]/[w] but- tons to select the settings, and use the Left and Right [e]/[r] buttons to set them.

The settings are explained below.

98