Onkyo PR-SC886 Controlling Other Components—Continued, Resetting the Remote Controller, times

Controlling Other Components—Continued

Remote Control Codes for Onkyo Components Connected via u

Onkyo components that are connected via uare con- trolled by pointing the remote controller at the AV con- troller, not the component. This allows you to control components that are out of view, in a rack, for example.

1	Make sure the Onkyo component is con-
	nected with an u cable and an analog
	audio cable (RCA).
	See page 44 for details.
2	Enter the appropriate remote control code
	to the REMOTE MODE button.
	• [DVD] REMOTE MODE button
	5002: Onkyo DVD player with u
	• [CD] REMOTE MODE button
	6002: Onkyo CD player with u
	• [MD] REMOTE MODE button
	6008: Onkyo MD recorder with u
	• [CDR] REMOTE MODE button
	6006: Onkyo CD recorder with u
	• [DOCK] REMOTE MODE button
	6004: Onkyo RI Dock with u
	See the previous page for how to enter remote
	control codes.
3	Press the REMOTE MODE button, point
	the remote controller at the AV controller,

and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component that’s not connected via u, use the following remote control codes:

• [DVD] REMOTE MODE button

5001: Onkyo DVD player without u(default)

• [CD] REMOTE MODE button

6001: Onkyo CD player without u(default)

• [MD] REMOTE MODE button 6007: Onkyo MD recorder without u

• [CDR] REMOTE MODE button 6005: Onkyo CD recorder without u

• [DOCK] REMOTE MODE button 6003: Onkyo RI Dock without u

Note:

If you connect an u-capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the AUX 1 jacks, for u to work properly, you must set the Input Display accord- ingly (see page 57).

Resetting the REMOTE MODE Buttons

You can reset a REMOTE MODE button to its default remote control code.

1	While holding down the REMOTE
	MODE button that you want to
	reset, press the TV [9] button.
	The Remote indicator flashes three
	times.

2	Press the REMOTE MODE button
	again.

The Remote indicator flashes twice, indicating that the button has been reset.

The [DVD] and [CD] REMOTE MODE buttons are preprogrammed with remote control codes for control- ling Onkyo DVD players and CD play- ers, respectively. When these buttons are reset, the preprogrammed codes are restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1	While holding down the
	[RECEIVER] REMOTE MODE but-
	ton, press the [STANDBY] button.
	The Remote indicator flashes five
	times.

2	Press the [RECEIVER] REMOTE
	MODE button again.
	The Remote indicator flashes twice,
	indicating that the remote controller
	has been reset.

123