Onkyo PR-SC886 instruction manual 105

Advanced Setup—Continued

Resolution

You can specify the output resolution for the HDMI out- puts and have the AV controller upconvert the picture resolution as necessary to match the resolution sup- ported by your TV.

Available only when Source has been selected under the “1-1. Monitor Out” setting.

Through: Select this to pass video through the AV con- troller at the same resolution and with no conversion (default).

Auto: Select this to have the AV controller auto- matically convert video at resolutions not supported by your TV.

When the “Monitor Out” is set to “Analog”, it will operate as “Through”.

480p (480/576p):

Select this for 480p or 576p output and video conversion as necessary.

720p: Select this for 720p output and video con- version as necessary.

1080i: Select this for 1080i output and video con- version as necessary.

1080p: Select this for 1080p output and video con- version as necessary.

When the “Monitor Out” is set to “Analog”, it will operate as “1080i”.

Brightness

With this setting you can adjust the picture brightness. Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the darkest. “+50” is the brightest.

Contrast

With this setting you can adjust Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the least. “+50” is the greatest.

Hue

With this setting you can adjust the red/green balance. Can be adjusted from –20 to +20 in steps of 1 (default is 0).

“–20” is the strongest green. “+20” is the strongest red.

Saturation

With this setting you can adjust saturation.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the weakest color. “+50” is the strongest color.

Picture Mode

DVD-Video disc content originates from either film (recorded at 24 frames per second) or video intended for TV (recorded at 30 frames per second). With the default Picture Mode setting of Auto, the AV controller automat- ically detects the type of content and processes it accord- ingly to achieve the best picture quality. If the AV controller detects the type of content incorrectly due to characteristics of the disc, you can select Video or Film manually.

Auto: The type of content is detected automati- cally and processed accordingly (default).

Video: Select when playing a DVD-Video disc whose content originates from video.

Film: Select when playing a DVD-Video disc whose content originates from film.

Edge Enhancement

With Edge Enhancement, you can make the picture appear sharper.

Off: Edge enhancement off (default). Low: Low edge enhancement.

Medium: Medium edge enhancement. High: High edge enhancement.

Mosquito NR

With Mosquito Noise Reduction, you can remove the shimmering or haziness that sometimes appears around objects in the picture. Mosquito noise can be an issue with overly compressed MPEG content.

Off: Mosquito noise reduction off (default). Low: Low mosquito noise reduction.

Medium: Medium mosquito noise reduction. High: High mosquito noise reduction.

Random NR

With Random Noise Reduction, you can remove indis- criminate picture noise, such as film grain.

Off: Random noise reduction off (default). Low: Low random noise reduction.

Medium: Medium random noise reduction. High: High random noise reduction.

Block NR

With Block Noise Reduction, you can remove the block distortion that sometimes appears in the picture. Block noise can be an issue with overly compressed MPEG content.

Off: Block noise reduction off (default).

On: Block noise reduction on.

Gamma

Adjust the balance of incoming picture R (red), G (green), and B (blue) color data signal to the output color data signal.

Can be adjusted from –3 to +3 in steps of 1 (default is 0).

105