Onkyo PR-SC886 2 3 4, Monitor Out Setup, First Time Setup—Continued, Analog, HDMI Main, HDMI Sub

First Time Setup—Continued

Monitor Out Setup

	1
2, 3	2–6
1, 7

If you connect your TV to the COMPONENT VIDEO MONITOR OUT 1 or 2, set the “Monitor Out” setting to “Analog” so that the onscreen setup menus are displayed and composite video and S-Video sources are upcon- verted and output by the COMPONENT VIDEO MON- ITOR OUT 1 or 2.

If you connect your TV to the HDMI OUT MAIN or HDMI OUT SUB, set the “Monitor Out” setting to “HDMI Main” or “HDMI Sub”, respectively, so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted and output by the HDMI OUT MAIN or

HDMI OUT SUB.

You can specify the output resolution for the HDMI out- puts and COMPONENT VIDEO outputs and have the AV controller upconvert the picture resolution as neces- sary to match the resolution supported by your TV.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2

3

4

Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1.Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

Use the Up and Down [q]/[w] but- tons to select “1. Monitor Out”, and then press [ENTER].

The “Monitor Out” menu appears.

1–1.	Monitor Out
Monitor Out			Analog
Resolution			Through
Brightness		0
Contrast		0
Hue		0
Saturation		0
MOVE	VALUE		RETURN		EXIT
		RETURN		SETUP

Use the Up and Down [q]/[w] but- tons to select “Monitor Out”, and use the Left and Right [e]/[r] buttons to select:

Analog:

Select this if your TV is connected to the COMPONENT VIDEO MONITOR OUT 1 or 2, S MONI- TOR OUT, or V MONITOR OUT.

HDMI Main:

Select this if your TV is connected to the HDMI OUT MAIN.

HDMI Sub:

Select this if your TV is connected to the HDMI OUT SUB.

Note:

When “HDMI Main” or “HDMI Sub” is selected, the onscreen setup menus are output by only the HDMI outputs.

If you’re not using the HDMI outputs and select “HDMI Main” or “HDMI Sub” by mistake and the menus dis- appear, press the AV controller’s [HDMI OUT] button so that “Moni- tor Out: Analog” appears on the dis- play.

49