First Time Setup—Continued

6

7

8

9

When prompted, place the setup microphone at the next position, and repeat step 5.

After the 3rd or 7th measure- ment, the following screen appears.

Auto Speaker Setup

Next

Finish(Calculate )

Select [Next] to measure the next position, or select [Finish] to calculate the Audyssey MultEQ room EQ solution.

MOVE

ENTER ENTER

Use the Up and Down [q]/[w] but- tons to select an option, and then press [ENTER].

Next:

Select “Next” to begin measuring the next measurement position. After the 8th measurement has been taken, the procedure automatically proceeds to step 8.

Finish(Calculate):

Select this if you don’t want to measure any more listening posi- tions and are ready to calculate the results, then go to step 8.

When the measurements are complete, the following screen

appears.

Auto Speaker Setup

Calculating...

When the calculations are com- plete, the following screen appears.

Auto Speaker Setup

Save

Review SP Config

Review SP Distance

Review SP Level

Cancel

MOVE

ENTER ENTER

Use the Up and Down [q]/[w] but- tons to select an option, and then press [ENTER].

Save:

Save the calculated settings and exit the automatic speaker setup.

Review SP Config:

Review the speaker configuration settings (see “Reviewing the Results” on page 63).

Review SP Distance:

Review the speaker distance set- tings (see “Reviewing the Results” on page 63).

Review SP Level:

Review the speaker level settings (see “Reviewing the Results” on page 63).

Cancel:

Cancel the automatic speaker setup.

10

If you selected “Save”, the results are

 

 

saved, and the following screen

 

appears.

 

Auto Speaker Setup

 

Saving...

11

Disconnect the setup MIC.

 

 

Auto Speaker Setup

 

Please, unplug Setup Mic.

Notes:

When the automatic speaker setup is complete, the “Equalizer Settings” (page 95) will be set to Audyssey.

You can cancel the automatic speaker setup at any point in the procedure simply by disconnecting the setup microphone.

61

Page 61
Image 61
Onkyo PR-SC886 instruction manual Disconnect the setup MIC