Onkyo PR-SC886 instruction manual Audio Connection Formats, Connecting the AV Controller—Continued

Connecting the AV Controller—Continued

■“Monitor Out” Setting Set to

“Analog”

With the “Monitor Out” setting set to “Analog” (see page 46), video input signals flow through the AV controller as shown, with composite video and S-Video sources being upconverted for the component video output. Use this set-

ting if you connect the AV controller’s

COMPONENT VIDEO MONITOR OUT 1 or 2 to your TV.

Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

This signal flow also applies when the Monitor Out “Resolution” setting is set to “Through” (see page 49).

Video Signal Flow and the Resolution Setting

When the “Monitor Out” setting is set to “Ana- log” (see page 46), if the Monitor Out “Reso- lution” setting is set to anything other than “Through” (see page 49), the video signal flow will be as shown here, with composite video and S-Video sources being upconverted for the component video output.

The composite video, S-Video, and component video outputs pass through their respective analog input signals as they are. HDMI input signals are not output.

Video Signal Flow Chart

DVD player, etc.

Composite S-Video Component HDMI

IN

AV controller

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

Video Signal Flow Chart

DVD player, etc.

Composite S-Video Component HDMI

IN

AV controller

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

Audio Connection Formats

Audio equipment can be connected to the AV controller by using any of the following audio connection formats: analog, optical, coaxial, analog multichannel, or HDMI.

When choosing a connection format, bear in mind that the AV controller does not convert digital input signals for analog line outputs and

Audio Signal Flow Chart

DVD player, etc.

Analog Multichannel Optical Coaxial HDMI

vice versa. For example, audio signals con- nected to an optical or coaxial digital input are not output by the analog TAPE OUT.

AV controller

MD recorder, etc.

*2

Analog Optical HDMI

*1

*1 Depends on the “Audio TV Output” setting (see page 111).

30