Onkyo PR-SC886 Hardware Setup, Remote Control, Zone2/Zone3, Advanced Setup—Continued, times

Advanced Setup—Continued

Hardware Setup

This section explains items on the Hardware menu.

	Remote
	indicator
Number	INPUT
buttons
	RECEIVER
ENTER
SETUP
1	Press the [RECEIVER] REMOTE

MODE button, followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

7.Hardware Setup

1.Remote Control

2.Zone2/Zone3

3.Tuner

4.Analog Multich

	5.	HDMI
	6.	Network
		MOVE	ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-

tons to select an item, and then press [ENTER].

The screen for that item appears.

4 Use the Up and Down [q]/[w] but- tons to select an item, and use the Left and Right [e]/[r] but- tons to change it.

The items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV control- ler by using its [SETUP] button, arrow buttons, and [ENTER] button.

Remote Control

■Remote ID

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differenti- ate the AV controller from the other components, you can change its remote ID from 1, the default, to 2 or 3.

Note:

If you do change the AV controller’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the Remote Controller’s ID

1	While holding down the
	[RECEIVER] REMOTE MODE but-
	ton, press the TV [INPUT] button.
	The Remote indicator flashes four
	times.

2	Use the number buttons to enter
	ID 1, 2, or 3.
	The Remote indicator flashes twice.

Zone2/Zone3

See “Zone 2 and Zone 3” on page 115.

110