Onkyo PR-SC886 TV Format Setup not North American models, First Time Setup—Continued

First Time Setup—Continued

TV Format Setup

(not North American models)

For the onscreen setup menus to display properly, you must specify the TV system used in your area.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “6. Miscella- neous”, and then press [ENTER]. The “Miscellaneous” menu appears.

6.Miscellaneous

1.Volume Setup

2.OSD Setup

3.12V Trigger A Setup

	4.	12V Trigger B Setup
	5.	12V Trigger C Setup
		MOVE		ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-
	tons to select “2. OSD Setup”,
	and then press [ENTER].
	The “OSD Setup” menu appears.
		6–2.	OSD Setup
		Immediate Display		On
		Monitor Type		16 : 9
		Display Position		Bottom
		TV Format		Auto
		Language		English
		MOVE	VALUE	RETURN RETURN SETUP EXIT

Note:

The “TV Format” (*) setting is not available on the North American mod- els.

4 Use the Up and Down [q]/[w] but- tons to select “TV Format”, and then use the Left and Right [e]/[r] buttons to select:

Auto: Select this to have the AV controller automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

5	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV control- ler by using its [SETUP] button, arrow buttons, and [ENTER] button.

56