Onkyo PR-SC886 Component Video Setup, First Time Setup—Continued, appears, Press the SETUP button

First Time Setup—Continued

Component Video Setup

If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 3, you must assign COM- PONENT VIDEO IN 3 to the DVD input selector.

By default, the DVD input selector is assigned to COM- PONENT VIDEO IN 1, and all of the other input selec- tors are assigned to the “- - -” option.

Input selector	Default assignment
DVD	IN1
VCR/DVR	- - -
CBL/SAT	- - -
GAME/TV	- - -
AUX1	- - -
AUX2	- - -
TAPE	- - -
TUNER	- - - (Fixed)
CD	- - -
PHONO	- - -

If you’ve connected your TV to the AV controller with a component video cable, you can set the AV controller so that composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MON- ITOR OUT 1 or 2. You can set this for each input selector by selecting the “- - -” option.

Composite video, S-Video		Component video
	IN
	OUT
Composite video, S-Video		Component video
1	Press the [RECEIVER] button,

followed by the [SETUP] button. The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1.Input/Output Assign

1.Monitor Out

2. HDMI Input

3. Component Video Input

4.Digital Audio Input

5.Analog Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Component
	Video Input”, and then press
	[ENTER].
	The “Component Video Input” menu
	appears.
	1–3.	Component Video Input
	DVD		IN1
	VCR/DVR		- - -
	CBL/SAT		- - -
	GAME/TV		- - -
	AUX1		- - -
	AUX2		- - -
	MOVE	VALUE	RETURN RETURN SETUP EXIT
4	Use the Up and Down [q]/[w] but-

tons to select an input selector, and use the Left and Right [e]/[r] buttons to select:

IN1: Use the video component connected to COMPONENT VIDEO IN 1.

IN2: Use the video component connected to COMPONENT VIDEO IN 2.

IN3: Use the video component connected to COMPONENT VIDEO IN 3.

-- -:Output composite video and S-Video sources from the

COMPONENT VIDEO MONITOR OUT.

5	Press the [SETUP] button.
	Setup closes.

Notes:

•For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT 1 or 2, the “Monitor Out” setting must be set to “Analog” (see page 49), and the “Component Video Input” set- ting must be set to “- - -”. See page 30 for more infor- mation on video signal flow and upconversion.

•This procedure can also be performed on the AV con- troller by using its [SETUP] button, arrow buttons, and [ENTER] button.

52