Onkyo PR-SC886 First Time Setup, Monitor Setup, The current setting is displayed, Analog

First Time Setup

This section explains the settings that you need to make before using the AV controller for the very first time.

Monitor Setup

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI OUT, as well as whether to have the onscreen setup menu output through the HDMI OUT or through an analog output.

1, 2

If you connect your TV to the COMPONENT VIDEO MONITOR OUT 1 or 2, set the “Monitor Out” setting to “Analog” so that the onscreen setup menus are displayed and composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MON- ITOR OUT 1 or 2.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

1	Press the [HDMI OUT] button.
	The current setting is displayed.

2	Press the [HDMI OUT] button
	repeatedly to select:
	Analog:

Select this if your TV is connected to the COMPONENT VIDEO MONITOR OUT 1 or 2, S MONI- TOR OUT, or V MONITOR OUT.

HDMI Main:

Select this if your TV is connected to the HDMI OUT MAIN.

HDMI Sub:

Select this if your TV is connected to the HDMI OUT SUB.

Note:

When “HDMI Main” or “HDMI Sub” is selected, the onscreen setup menus are output by only the HDMI outputs.

If you’re not using the HDMI outputs and select “HDMI Main” or “HDMI Sub” by mistake and the menus dis- appear, press the [HDMI OUT] but- ton to select “Analog”.

Note:

If you connect your TV to the HDMI OUT MAIN or HDMI OUT SUB, set the “Monitor Out” setting to “HDMI Main” or “HDMI Sub” so that the onscreen setup menus are displayed and composite video, S- Video, and component video sources are upconverted* and output by the HDMI OUT MAIN or HDMI OUT SUB. The onscreen setup menus are displayed on the HDMI OUT MAIN or HDMI OUT SUB only.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

You can specify the output resolution for the HDMI OUT MAIN or HDMI OUT SUB and COMPONENT VIDEO MONITOR OUT and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV (see page 104).

See page 29 for charts showing how the “Monitor Out” and “Resolution” (see pages 49, 50) settings affect the video signal flow through the AV controller.

46