Onkyo PR-SC886 Controlling Other Components, Entering Remote Control Codes, one that works best

Controlling Other Components

You can control your other components, including those made by other manufacturers, with the remote controller. This section explains how to:

•Enter the remote control code for a component that you want to control: DVD, TV, VCR, etc.

•Learn commands directly from another component’s remote controller (see page 125).

•Program the MACRO buttons to perform a sequence of up to eight remote control actions (see page 126).

Entering Remote Control Codes

To control another component, you must first enter that component’s remote control code to a REMOTE MODE button. You’ll need to enter a code for each component that you want to control.

	Remote
STANDBY	indicator
	TV I
Number
buttons
REMOTE
MODE	RECEIVER

1	Look up the component’s remote
	control code in the separate
	Remote Control Codes list.
	The codes are organized by category.

2	While holding down the REMOTE
	MODE button to which you want
	to enter the code, press the
	[STANDBY] button.
	The Remote indicator lights up.

3			Within 30 seconds, use the num-
DVD	VCR/DVR	CBL/SAT	ber buttons to enter the 4-digit
1	2	3	remote control code.
GAME/TV	AUX1	AUX2	The Remote indicator flashes twice.
4	5	6
TAPE	TUNER	CD
7	8	9
	0

4	Press the REMOTE MODE button
	again to select the remote con-
	troller mode, point the remote
	controller at the component, and
	check the operation.
	If the remote controller doesn’t work as
	expected, and several remote codes are
	listed, try each one in turn and use the
	one that works best.

Notes:

•Remote control codes cannot be entered for the [RECEIVER], [ZONE 2] and [ZONE 3] REMOTE MODE buttons.

•The remote control codes provided are correct at the time of printing but subject to change.

•The [DVD] and [CD] REMOTE MODE buttons are preprogrammed for use with Onkyo DVD players and CD players, respectively.

•To control another manufacturer’s CD recorder, MD recorder or Onkyo RI Dock, enter the appro- priate remote control code to the [CD] REMOTE MODE button.

122