Onkyo PR-SC886 Bi-ampingthe Front Speakers, Connecting the AV Controller—Continued

Connecting the AV Controller—Continued

Bi-amping the Front Speakers

The FRONT L/R and SURR BACK L/R outputs can be used with front speakers and surround back speakers, respec- tively, or bi-amped to provide separate tweeter and woofer feeds for a pair of front speakers that support bi-amping, providing improved bass and treble performance.

•When bi-amping is used, the AV controller is able to feed up to 5.1 speakers in the main room.

•For bi-amping, the FRONT L/R outputs feed the front speakers’ woofer terminals. And the SURR BACK L/R outputs feed the front speakers’ tweeter terminals.

•Once you’ve completed the bi-amping connections shown below and turned on the AV controller, you must set the “Speaker Type” setting to “Bi-Amp” to enable bi-amping (see page 55).

Important:

•When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

•Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual.

See your multichannel power amplifier’s instruction manual for more information on connecting speakers.

AV controller

						Multichannel
						power amplifier
SURROUND BACK	SURROUND	FRONT	CENTER	FRONT	SURROUND	SURROUND BACK
RIGHT	RIGHT	RIGHT		LEFT	LEFT	LEFT
INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT
SELECT	SELECT	SELECT	SELECT	SELECT	SELECT	SELECT

OUTPUT

OUTPUT

OUTPUT

OUTPUT

OUTPUT

OUTPUT

OUTPUT

SPEAKER IMPEDANCE

4 OHMS MIN. PER EACH SPEAKER TERMINAL

FUSE	AC INLET	12V TRIGGER
		IN	OUT

SEVEN CHANNEL AMPLIFIER

MODEL NO. RDA-7.1

Surround right	Center speaker	Surround left
speaker		speaker

Tweeter (high)

Woofer (low)

Front right speaker Front left speaker

25