
Menu item
Run Initial Setup
Yes
No
Alarms
Cartridge Alarm
Off
Single
Print Recovery
Auto Continue
Disabled
5 sec
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
Off
On
Timeouts
Power Saver Disabled
Timeouts
Screen Timeout
Description
Instructs the printer to run the setup wizard
Notes:
•Yes is the factory default setting.
•After completing the setup wizard by selecting Done at the Country select screen, the default setting becomes No.
Sets an alarm to sound when the printer requires operator intervention
Note: Off is the factory default setting and means no alarm will sound.
Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period
Note: Disabled is the factory default setting.
Specifies whether the printer reprints jammed pages
Notes:
•Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
•On sets the printer to always reprint jammed pages.
•Off sets the printer to never reprint jammed pages.
Lets the printer successfully print a page that may not have printed otherwise
Notes:
•Off is the factory default setting. Off prints apartial page when there is not enough memory to print the whole page.
•On sets the printer to process the whole page so that the entire page prints.
Specifies the number of minutes of inactivity before some systems begin entering a minimum power state.
Note: 30 minutes is the factory default setting.
Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Understanding printer menus
83