Menu item Description
Portrait Height
3–14.17 inches
76–360 mm
Sets the portrait height
Notes:
If the height exceeds the maximum, the printer uses the maximum
height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.
Reports

Menu Settings Page menu

Menu item Description
Menu Settings Page Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information
Note: The page prints when this item is selected.

Device Statistics menu

Menu item Description
Device Statistics Prints a report c ontaining printer statistics such as supply information and
details about printed pages
Note: The page prints when this item is selected.
Understanding pri nter menus
76