5Press the arrow buttons until Units of Measure appears, and then press .

6Press the arrow buttons until the correct unit of measure appears, and then press .

Submitting changes appears, followed by the Universal Setup menu.

Specify the paper height and width

Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.

1From the Universal Setup menu, press the arrow buttons until Portrait Width or Portrait Height appears, and then press .

Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width setting.

2Press the arrow buttons to decrease or to increase the setting, and then press .

Submitting changes appears, followed by the Universal Setup menu.

Loading the standard 250-sheet tray

The printer has one standard 250-sheet tray (Tray 1) and may have an optional 650-sheet duo drawer. The 250-sheet tray and 650-sheet duo drawer support the same paper sizes and types.

1Pull the tray out.

Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.

Loading paper and specialty media

36

Page 38
Image 38
Konftel G510-7276-00 manual Loading the standard 250-sheet tray, Specify the paper height and width