6Reinstall the system board access cover.
Installing a flash memory card
CAUTION—SHOCK HAZARD: If you are accessing the system board or insta lling optional hardware or memory
devices sometim e after setting u p the printer, the n turn the prin ter off, and unplu g the power cord from the
wall outlet before continuing. If you ha ve any other devices attached to the print er, then turn them off as well,
and unplug any cables going into the p rinter.
1Access the system board.
2Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
Additional printer set up
20