After Using the Machine, Towing the Machine

ENGLISH

USER MANUAL

AFTER USING THE MACHINE

After working, before leaving the machine, perform the following operations.

1.Turn off the dust control system water pump with the switch (27, Fig. D).

2.If open, close the dust control system taps (10, 11, 12, Fig. E).

3.Stop the 3rd broom and side broom rotation with the switch (29, Fig. D).

4.Lift the 3rd broom by pushing the joystick (46, Fig. D) rearward.

5.If necessary, shift the 3rd broom arm to working mode, by moving the joystick (46, Fig. D) to left.

6.Lift the suction inlet and side brooms by pressing the push-button (38, Fig. D).

7.Turn off the suction fan with the lever (8, Fig. E).

8.Turn the engine throttle lever (16, Fig. E) to idle, and hold it in this position for a few minutes to let the system stabilize.

9.Check that the hopper (7, Fig. G) is lowered and that the warning light (18, Fig. D) is off.

10.If necessary, bring the 3rd broom safety arm from the position (2, Fig. H) (disengaged) to the position (1) (engaged), by engaging the tooth (3) on the bracket (4).

11.Clean the hopper, the ﬁlters and the suction pipe, check the gaskets and lubricate the suction fan bearings, as shown in the Maintenance chapter.

12.Turn off the engine, by turning the ignition key (24, Fig. D) counterclockwise, to the end of stroke, then remove it.

13.Engage the parking brake with the lever (13, Fig. E).

14.The headlights must be turned off.

DUST CONTROL SYSTEM WATER TANK EMPTYING

When necessary, empty the dust control system water tanks according to the following procedure.

1.Engage the parking brake (13, Fig. E).

2.Turn the ignition key (24, Fig. D) to OFF position and remove it.

3.Operating over the right side of the rear axle, unscrew the water ﬁlter cover (1, Fig. Z) and remove it together with the ﬁlter.

4.Drain all the water from the tanks.

5.Install the cover (1, Fig. Z) and the ﬁlter.

TOWING THE MACHINE

To tow the machine, proceed as follows.

1.Engage the parking brake (13, Fig. E).

2.Turn the ignition key (24, Fig. D) to OFF position and remove it.

3.Disengage the fastener (32, Fig. G) with the supplied key, then lift right under-cab lid (31).

4.Loosen the drive system pump screw (1, Fig. AP) two turns.

5.Tow the machine.

6.After towing the machine, tighten the screw (1, Fig. AP), then lower the right under-cab lid (31, Fig. G) and engage the fastener with the supplied key.

33014576(4)2008-02 A

RS 850

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.

Nilfisk-ALTO RS 850 After Using the Machine, Dust Control System Water Tank Emptying

Models: RS 850